Vol. 4 No. S1 (2022): Trans. AMMM Supplement | Transactions on Additive Manufacturing Meets Medicine

Industrial Keynotes

Personalization of radiotherapy with VSP Bolus

Riley Bruce, Luca Carnevali

https://doi.org/10.18416/AMMM.2022.2209685
Industrial Keynotes, ID 685
Article-Views: 38 | PDF-Downloads: 40
- PDF
Are my parts safe? Quality control in AM

Lennart Schulenburg

https://doi.org/10.18416/AMMM.2022.2209691
Industrial Keynotes, ID 691
Article-Views: 28 | PDF-Downloads: 21
- PDF
Pushing the limits of metal additive manufacturing

Jan Wilkes

https://doi.org/10.18416/AMMM.2022.2209698
Industrial Keynotes, ID 698
Article-Views: 23 | PDF-Downloads: 51
- PDF
An Evaluation of bio-inspired patterns for soft tissue-mimicking with multi-material 3D-printing

Oliver Grimaldo Ruiz, Mariana Rodriguez, Elena Ingrassia, Filippo Maniero, Federico Vecchio, Vito Burgio, Ido Bitan, Marco Civera, Giuseeppe Lacidogna, Cecilia Surace

https://doi.org/10.18416/AMMM.2022.2209650
Industrial Keynotes, ID 650
Article-Views: 39 | PDF-Downloads: 46
- PDF
Mass personalization: From data analysis to print – and how AI helps

Björn Petersen

https://doi.org/10.18416/AMMM.2022.2209699
Industrial Keynotes, ID 699
Article-Views: 22 | PDF-Downloads: 28
- PDF

Medical Diagnostics and Therapy

Treating Facial Anomalies with the 3D-Printer - Establishing a fully digital workflow for cleft palate children

Paul Kübel, Cedric Hinrichs, Jürgen Lichtenstein, Henning Wieker, Jörg Wiltfang

https://doi.org/10.18416/AMMM.2022.2209665
Medical Diagnostics and Therapy, ID 665,
Article-Views: 51 | PDF-Downloads: 45
- PDF

Medical Aids and Devices

3d printed trials and short-term devices Cost reduction and added value through 3D printed short-term devices

Niclas Marquardt

https://doi.org/10.18416/AMMM.2022.2209651
Medical Aids and Devices, ID 651
Article-Views: 37 | PDF-Downloads: 32
- PDF
3d printed venous access simulator for hemophilia patients

Jack B. Stubbs, James Inziello, Kristin Stubbs, Sebastian Ortiz, Fluvio Lobo Fenoglietto, Stephanie Sharon, Shveta Gupta

https://doi.org/10.18416/AMMM.2022.2209649
Medical Aids and Devices, ID 649
Article-Views: 58 | PDF-Downloads: 50
- PDF
PP Smoothing Process Using Green Solvents

Chinemelum Nedolisa, Konstantin Rybalcenko

https://doi.org/10.18416/AMMM.2022.2209638
Medical Aids and Devices, ID 638
Article-Views: 101 | PDF-Downloads: 67
- PDF

Imaging and Modelling in 3D Printing

Optimized detection of lack-of-fusion defects in 3D printed components using µCT

Katharina Bliedtner, Polina Dedyaeva, Frank Herold

https://doi.org/10.18416/AMMM.2022.2209642
Imaging and Modelling in 3D Printing, ID 642
Article-Views: 32 | PDF-Downloads: 30
- PDF
Digital work flow and process for additive manufacturing of patient-specific-implants for craniomaxillofacial reconstruction

Philipp Imgrund, Phillip Gromzig, Christian Böhm, Lotta Röhrich, Peter Lindecke, Jan Walter, Arthur Seibel, Yannick Löw, Farzaneeh Aavani, Johannes Krösbacher, Sandra Fuest, Sebastian Eilermann, Martin Gosau, Ralf Smeets, Oliver Niggemann

https://doi.org/10.18416/AMMM.2022.2209680
Imaging and Modelling in 3D Printing, ID 680
Article-Views: 117 | PDF-Downloads: 77
- PDF
3D metrological characterization of functionally graded porous beta-titanium cellular structures to reproduce the complex internal human bone architecture

Lorena Emanuelli, Alireza Jam, Anton du Plessis, Carlo Lora, Raffaele De Biasi, Matteo Benedetti, Massimo Pellizzari

https://doi.org/10.18416/AMMM.2022.2209658
Imaging and Modelling in 3D Printing, ID 658
Article-Views: 95 | PDF-Downloads: 106
- PDF

Scaffolds, Implants and Drug Delivery Systems

3D Bio printed Biodegradable PLGA-HAp Composite Material for Pediatric CranioMaxilloFacial Implants

Ece Tutsak, Onur Demirak

https://doi.org/10.18416/AMMM.2022.2209637
Scaffolds, Implants and Drug Delivery Systems, ID 637
Article-Views: 78 | PDF-Downloads: 50
- PDF
Composite poly(L-lactic acid) - ceramic structures for fully degradable cranial implants

Ana Grzeszczak, Jonas Åberg, Cecilia Persson

https://doi.org/10.18416/AMMM.2022.2209636
Scaffolds, Implants and Drug Delivery Systems, ID 636
Article-Views: 37 | PDF-Downloads: 54
- PDF
Investigations on cell adherent coatings on electrospun membranes for RPE implants

Kristina Lachmann, Veysel Zeren, Bastian Christ, Christina Fey, Katharina Schmidt, Ina Meiser, Julia C. Neubauer, Michael Thomas

https://doi.org/10.18416/AMMM.2022.2209669
Scaffolds, Implants and Drug Delivery Systems, ID 669
Article-Views: 38 | PDF-Downloads: 31
- PDF
Comparative Analysis of Laser Powder Bed Fusion (L-PBF) manufactured Co-Cr-Mo and Co-Cr-Mo-Fe alloy for dental applications: Metallographic, Mechanical & Corrosion analyses

Jag Parvesh Dahiya, Manas Ranjan Sahu, T. S. Sampath Kumar, Murugaiyan Amirthalingam

https://doi.org/10.18416/AMMM.2022.2209645
Scaffolds, Implants and Drug Delivery Systems, ID 645
Article-Views: 77 | PDF-Downloads: 89
- PDF
Individualized, drug delivering implants for treatment of otologic and rhinologic disorders

Verena Scheper, Chunjiang Wei, Ziwen Gao, Dorian Alcacer Labrador, Samuel John, Felix Repp, Robert Mau, Hermann Seitz, Anne Seidlitz, Vanessa Domsta, Martin Ulbricht, Stefan Senekowitsch, Werner Weitschies, Thomas Lenarz, Farnaz Matin-Mann

https://doi.org/10.18416/AMMM.2022.2209681
Scaffolds, Implants and Drug Delivery Systems, ID 681
Article-Views: 101 | PDF-Downloads: 37
- PDF

Material Properties, Structural Designs, and Printing Technologies

Compliant vascular models 3D printed with Stratasys J750: a direct characterization of model distensibility using intravascular ultrasound

Adam Sparks, Cody Smith, Ariana Allman, Jillian Senko, Karen Meess, Richard Ducharme, Michael Springer, Muhammad Waqas, Adnan Siddiqui

https://doi.org/10.18416/AMMM.2022.2209667
Material Properties, Structural Designs, and Printing Technologies, ID 667
Article-Views: 45 | PDF-Downloads: 27
- PDF
2.5D Melt printing of full spectrum medicinal Cannabis delivery microdepots

Almog Uziel, David Meiri, Dan Lewitus

https://doi.org/10.18416/AMMM.2022.2209635
Material Properties, Structural Designs, and Printing Technologies, ID 635
Article-Views: 40 | PDF-Downloads: 49
- PDF
A Novel system for ultrasound-assisted mixing of photopolymers with nanoparticles for additive manufacturing

Carsten Nordhoff, Dirk Gutkelch, Frank Wiekhorst, Fiona Sammler, Norbert Löwa

https://doi.org/10.18416/AMMM.2022.2209652
Material Properties, Structural Designs, and Printing Technologies, ID 652
Article-Views: 37 | PDF-Downloads: 44
- PDF
Digital-Light-Processing technologies to manufacture biocompatible bone scaffolds

Sven Malte Krümpelmann, Julie Kühl, Leah Picek, Andreas Seekamp, Sabine Fuchs

https://doi.org/10.18416/AMMM.2022.2209682
Material Properties, Structural Designs, and Printing Technologies, ID 682
Article-Views: 41 | PDF-Downloads: 56
- PDF
Extrusion-based 3D printing of osteoinductive scaffolds with a spongiosa-like structure

Julie Kühl, Stanislav Gorb, Hendrik Naujokat, Andreas Seekamp, Sabine Fuchs

https://doi.org/10.18416/AMMM.2022.2209683
Material Properties, Structural Designs, and Printing Technologies, ID 683
Article-Views: 44 | PDF-Downloads: 50
- PDF
Tailoring mechanical properties and fatigue strength by varying gyroid unit cell sizes on electron beam manufactured scaffolds

Christian Polley, Wiebke Radlof, Friederike Hauschulz, Christopher Benz, Manuela Sander, Hermann Seitz

https://doi.org/10.18416/AMMM.2022.2209646
Material Properties, Structural Designs, and Printing Technologies, ID 646
Article-Views: 86 | PDF-Downloads: 47
- PDF
Effects of additive manufacturing and sterilization on a medical grade biodegradable polymer

Stefanie Ficht, Lukas Schübel, Magdalena Kleybolte, Markus Eblenkamp, Jana Steger, Dirk Wilhelm, Petra Mela

https://doi.org/10.18416/AMMM.2022.2209643
Material Properties, Structural Designs, and Printing Technologies, ID 643
Article-Views: 34 | PDF-Downloads: 40
- PDF
Jet-based bioprinting of viable human cells

Annika C. Dell, Abel B. Negussie, Grayson A. Wagner, John P. Geibel

https://doi.org/10.18416/AMMM.2022.2209641
Material Properties, Structural Designs, and Printing Technologies, ID 641
Article-Views: 43 | PDF-Downloads: 44
- PDF
New possibilities through Puredyne print heads for bioprinting

Felix Gruber

https://doi.org/10.18416/AMMM.2022.2209656
Material Properties, Structural Designs, and Printing Technologies, ID 656
Article-Views: 28 | PDF-Downloads: 31
- PDF
Anisotropic blood contactor module with immobilized enzyme to treat septic acute kidney injury Design and evaluation of triply periodic minimal surface structures for blood applications

Lukas Tobias Hirschwald, Franziska Hagemann, Maria Restrepo, Petar Peric, Tim Höhs, Märthe Tillmann, Florian Neuhaus, John Linkhorst, Matthias Wessling

https://doi.org/10.18416/AMMM.2022.2209657
Material Properties, Structural Designs, and Printing Technologies, ID 657
Article-Views: 53 | PDF-Downloads: 62
- PDF
Functionalization of 3D-printed tablets by atmospheric pressure plasma coating

Johanna Reus, Kevin Hain, Marius Tidau, Jan Henrik Finke, Kristina Lachmann

https://doi.org/10.18416/AMMM.2022.2209661
Material Properties, Structural Designs, and Printing Technologies, ID 661
Article-Views: 50 | PDF-Downloads: 45
- PDF

Medical Phantoms for Planning, Training, and Quality Assurance

3D printed radioactive phantoms for Positron Emission Tomography

Steven Seeger, Ezzat Elmoujarkach, Nadine Möller, Christian Schmidt, Magdalena Rafecas

https://doi.org/10.18416/AMMM.2022.2209640
Medical Phantoms for Planning, Training, and Quality Assurance, ID 640
Article-Views: 87 | PDF-Downloads: 58
- PDF

Scientific Keynotes

Bone tissue reconstruction: From cellular self-assembly to 3D (bio)printing

Sabine Fuchs

https://doi.org/10.18416/AMMM.2022.2209700
Scientific Keynotes, ID 700
Article-Views: 42 | PDF-Downloads: 41
- PDF

Miscellaneous

Laser based material processing for medical and biotechnology applications

Christopher Kren, Conrad Jahnke, Norbert Koop

https://doi.org/10.18416/AMMM.2022.2209703
Miscellaneous, ID 703
Article-Views: 41 | PDF-Downloads: 34
- PDF
Field Generator for INSPECT with optimized Cooling

Narayan Menon, Ankit Malhotra, Kerstin Lüdtke-Buzug

https://doi.org/10.18416/AMMM.2022.2209672
Miscellaneous, ID 672
Article-Views: 45 | PDF-Downloads: 19
- PDF