Transactions on Additive Manufacturing Meets Medicine
Vol. 3 No. 1 (2021): Trans. AMMM
https://doi.org/10.18416/AMMM.2021.2109578

Printed Anatomy for Planning, Training, and Phantoms for Quality Assurance, ID 578

Modular simulation of neuroangiography and endovascular interventions in neuroradiology

Main Article Content

Hannes Schwenke (Department of Neuroradiology, University Hospital Schleswig-Holstein, Campus Lübeck, Lübeck, Germany), Leonora Calopresti (Department of Neuroradiology, University Hospital Schleswig-Holstein, Campus Lübeck, Lübeck, Germany), Thorsten M. Buzug (Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE, Lübeck, Germany and Institute of Medical Engineering, University of Lübeck, Lübeck, Germany), Peter Schramm (Department of Neuroradiology, University Hospital Schleswig-Holstein, Campus Lübeck, Lübeck, Germany), Thomas Friedrich (Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE, Lübeck, Germany)

Copyright (c) 2021 Transactions on Additive Manufacturing Meets Medicine

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Abstract

A concept for a specialized phantom system for the simulations of diagnostic and therapeutic procedures in neuroradiology is presented. The modular simulator can be used for testing and training of both, established and new approaches in image guided catheter interventions. The 3D printing of anatomical vessel phantoms allows for the reproduction of specific features of the vasculature on the path of the catheter.

Article Details

How to Cite

Schwenke, H., Calopresti, L., Buzug, T. M., Schramm, P., & Friedrich, T. (2021). Modular simulation of neuroangiography and endovascular interventions in neuroradiology. Transactions on Additive Manufacturing Meets Medicine, 3(1), 578. https://doi.org/10.18416/AMMM.2021.2109578

Most read articles by the same author(s)

1 2 3 4 > >>