Journal of Additive Manufacturing Technologies

Articles

• Effect of process parameters of the positive displacement pump for extrusion based bioprinting application

  Yusuf Furkan Ugurluoglu, Piergiorgio Gentile, Ana Ferreira-Duarte, Javier Munguia

  DOI https://doi.org/10.18416/JAMTECH.2111560

  Articles, 560
• Parametric simulations for residual stresses and distortions of inconel 625 fabricated by laser powder bed fusion additive manufacturing

  Özgür Poyraz, Evren Yasa, Lutfi Taner Tunc, Koray Kilicay

  DOI https://doi.org/10.18416/JAMTECH.2111530

  Articles, 530
• Ordered multi-material SIMP approach applied to 3D topology optimization

  Egecan Ozcakar, Ugur Simsek, Gullu Kiziltas

  DOI https://doi.org/10.18416/JAMTECH.2111544

  Articles, 544
• Investigating cause of the dissimilar ductility of Inconel 718 fabricated by electron beam melting (EBM)

  Caglar Unver, Ayça Ürkmez, Guney Mert Bilgin, Akin Orhangul, Servet Turan, Dilek Turan

  DOI https://doi.org/10.18416/JAMTECH.2111555

  Articles, 555
• Effect of annealing conditions on microstructure and hardness of CoCrFeNiMn-0.18Ti high entropy alloy manufactured by electron beam melting

  Mehmet Caririci, Mui Ling Sharon Nai, Jun Wei, Jun Ding, Pan Wang

  DOI https://doi.org/10.18416/JAMTECH.2111526

  Articles, 526
• Investigation of process simulation and additive manufacturability of lattice-type support structures

  Emre Ozeren, Barış Pehlivanoğulları, Ceren Şen, Soner Ören, Akın Orhangül

  DOI https://doi.org/10.18416/JAMTECH.2111539

  Articles, 539
• An effective parameter in the deposition of 17-4PH powder with LMD technique: scanning speed

  Pelin Sezer, Semra Kurama, Taner Karagöz, Hakan Gasan

  DOI https://doi.org/10.18416/JAMTECH.2111551

  Articles, 551
• Surface texture and high cycle fatigue of as-built metal additive AlSi7Mg0.6

  Theresa Buchenau, Marc Amkreutz, Hauke Brüning

  DOI https://doi.org/10.18416/JAMTECH.2111531

  Articles, 531
• Evaluation of suitability of polypropylene manufactured by selective laser sintering for spare parts applications

  Deha Unal, Ibrahim Guzel

  DOI https://doi.org/10.18416/JAMTECH.2111548

  Articles, 548
• Multi-axis 3D printing of spiral parts without support structures

  Bartu Fazla, Mecid Uğur Dilberoğlu, Ulaş Yaman, Melik Dölen

  DOI https://doi.org/10.18416/JAMTECH.2111558

  Articles, 558
• The generative design process for robotic design applications

  Kartikeya Walia, Ahmed Khan, Philip Breedon

  DOI https://doi.org/10.18416/JAMTECH.2111528

  Articles, 528
• Powder coater monitoring for detection of anomalies in DMLM process

  Mehmet Bora Islier, Kerem Dortkasli

  DOI https://doi.org/10.18416/JAMTECH.2111543

  Articles, 543
• Weight reduction of an unmanned aerial vehicle pylon fitting by topology optimization and additive manufacturing with electron beam melting

  Fatih Yilmaz, Melin Şahin, Ercan Gürses

  DOI https://doi.org/10.18416/JAMTECH.2111553

  Articles, 553
• Experimental determination of thermal emissivities for Ti6Al4V in SLM method

  Mevlüt Yunus Kayacan, Nihat Yılmaz, Ahmet Özsoy

  DOI https://doi.org/10.18416/JAMTECH.2111494

  Articles, 494
• On the Z-dimensional accuracy of L-powder bed fusion

  Evren Yasa, I Kandemir, I Atik

  DOI https://doi.org/10.18416/JAMTECH.2111533

  Articles, 533
• A numerical investigation of the effect of support thickness and void ratio on thermal behavior and possible martensite decomposition in laser powder-bed fusion process

  Ebubekir Dogan, Ayşe Kübra Yıldız, Mehmet Mollamahmutoğlu, Oğuzhan Yılmaz

  DOI https://doi.org/10.18416/JAMTECH.2111549

  Articles, 549