Transactions on Additive Manufacturing Meets Medicine
Vol. 6 No. S1 (2024): Trans. AMMM Supplement
https://doi.org/10.18416/AMMM.2024.24091878
Lithography-based 3D printing of multiscale scaffolds using zinc oxide tetrapods
Main Article Content
Copyright (c) 2024 Christian Polley; Christoph Schareina, Jonas Lumma, Rainer Adelung, Leonard Siebert, Hermann Seitz
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Abstract
Zinc oxide (ZnO) has aroused great interest in recent years due to its multifunctional usability, particularly in the context of biomedical applications. A particular focus is on the use of tetrapodal ZnO micro- and nanoparticles, which have a unique 3D shape that is ideal for fabricating self-organized, highly porous micro-architected networks [1]. Due to their excellent degradability, t-ZnO networks can then serve as a sacrificial template for functionalization with low-dimensional nanomaterials such as graphene oxide (GO) or polymers like hydrogels [2]. Through etching the t-ZnO template so called aeromaterials can be obtained. Their open structure and tube-like arrangement transfer mere surface properties to volume properties with entirely new qualities emerging from this way of assembly.
Molding processes can quickly produce t-ZnO networks, but the resulting geometries are limited. The production of more complex structures, e.g., with undercuts or designed macroporosity, from pure t-ZnO has hardly been possible to date. These are vital, however, in applications like cell templates to grant cells and nutrients easy access to the networks. Developing a suitable additive manufacturing process for the fabrication of well-designed macroscopic structures with an inherent self-organized microstructure for biomedical or catalytic processes is, therefore highly desirable.
Here, we describe the development of a lithographic additive manufacturing process for processing highly filled t-ZnO slurries. Stable slurries could be developed by adapting the monomer composition, accompanied by rheological and sedimentation analyses, and the first scaffolds based on a gyroid design were manufactured with adapted printing parameters. Based on a thermogravimetric analysis, an appropriate thermal post-treatment protocol was established and final t-ZnO scaffolds with a self-organized microstructure were obtained. Scanning electron microscopy confirmed the highly porous microstructure of a t-ZnO network.
The scaffolds described here serve as a basis for further functionalization and show a promising approach for fabricating highly functionalized 3D-printed networks for biomedical applications.